ELB36R Firing System
ELB36R remote and hand control firing system is supplied power by the 220V electricity.
Eachcue can ignite about 10 pieces at the same time when the product connected in parallels.
This system is divided in A.B.C.D four areas, each area has 9 cues.
A.Technique Parameter:
Voltage :220V
Control Distance: 100M
Voltage of receiver: 12V
B. Using method:
1.Connect the connector plugs of firing system to the 220V current supply point put on theswitch, the 220V indicator shows bright, it means the electricity connect well.
2.Put the "test/fire" switch to the "test" position, then connect the products to the black/red aperture in series or parallels. Press the A.B.C.D button of the system or 1-4 button of the controller to test the connecting.
For example test by hand, please connect the products well if you need to test the eighth cue of area A, go to "reposition" press red button A, step by step eight times if the light of eighth cue is up, then connected well.
Tested by controller, press the button A of controller, step by step eight times if the light of eighth cue is up, then connected well.
3. After tested well, press the "reposition" button, put the switch to ¡:fire" position, then fire the products one by one. |